Take your floor coating to a new level with the new MICRO-TRAK PLUS Finish Applicator!
This lightweight by highly durable unit will deliver coating speeds 3 TIMES that of using a mop and bucket and will not burden you with a ‘pack on your back’!

Fas-Vac Li-Ion Battery wide area ALL SURFACE vacuum is a state of the art labor saving solution for larger areas. Fas-Vac is equipped with a 36V Li-Ion battery that delivers 1 1/2 hour consistent run time. Proven industrial design and lightweight design offer unrivaled maneuverability and performance. Large 1.5 cu yard capacity for fewer bag changes. Made proudly in the USA.

Get closer and tighter to corners and edges when cleaning literally any type of floor or baseboard.
Introducing the FAS-EDGE, the floor contractors best friend!

With a host of available tools, that can equip you to clean the edges and baseboard of virtually any floor surface, this tool will cut hours and hours off of most of your floor contracting jobs.

Made proudly in the USA.

Make a quart of cleaner, deodorizer and sanitizer with just a single tablet, about the size of an aspirin.

Designed for use in trigger bottles or with the 3-D Ultra Mop, the 3-D Fluid Mop or our NEW Table Mop, in areas like:
- school kitchens
- classrooms
- locker rooms
- school buses
and more.

Fas-Trak Industries is proud to introduce another patent pending breakthrough innovation performance solution in floor care.

The Stingray is designed specifically for applying floor finishes to small and medium size areas in facilities by the most efficient method available today! Fas-Trak Industries is the industry leader in application technology. (This part number refers a complete kit. Finish applicator and covers are also sold separately).

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak Plus, the 6-in-1 revolutionary application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak Plus, the 6-in-1 revolutionary application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak Plus, the 6-in-1 revolutionary application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

Make FOUR Gallons of Sanitizing Solution for use in any school location with just a single tablet.
Designed for use with the Ultra-Trak PLUS in areas like:
- school kitchens
- classrooms
- locker rooms
- school buses
and more.

Get 500 durable, re-usable, rinse-able rayon cleaning, disinfectant and dusting cloths in a box that is about the size of a child's lunchbox!

Each cloth starts out the size of a nickel and instantaneously grows in any (water-based) solution to make a 9" x 9" cloth.

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak, Concrete application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

This part number (CFT-5020-36) is for the 28" Concrete Applicator System only.

You can buy different configurations - 36" or 48" EZ Head Applicators to switch out on your base unit.)

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak, Concrete application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

This part number (CFT-5020-36) is for the 36" Concrete Applicator System only.

You can buy different configurations - 28" or 48" EZ Head Applicators to switch out on your base unit.)

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak, Concrete application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

This part number (CFT-5020-48) is for the 48" Concrete Applicator System only.

You can buy different configurations - 28" or 36" EZ Head Applicators to switch out on your base unit.)

Unsure how to quickly apply finishes to edges and corners?

Unclear how to apply finishes to edges?
Fas-Trak Industries is proud to announce the new, improved Micro-Trak, our hi-speed detail finish system! The Micro-Trak is primarily designed for high efficiency finish detailing and for small sections that are inaccessible with the Ultra-Trak system.

Fas-Trak Industries is proud to introduce another patent pending breakthrough innovation performance solution in floor care.

The Stingray is designed specifically for applying floor finishes to small and medium size areas in facilities by the most efficient method available today! Fas-Trak Industries is the industry leader in application technology. (This part number refers a complete kit. Finish applicator and covers are also sold separately).

There is absolutely nothing like the 3D Scrub Brush System for its ability to scrub uneven floors.

• Fits 15" trough 20" rotary machines


• Universal clutch plate for most rotary machine manufacturers


• 17-3/8" polypropylene pad and brush driver


• 2" polypropylene riser


• Mighty LOK pad holder and shower feed


• Naturally designed centering pad holder


• 4 reversible, replaceable, interchangeable brush inserts

There is absolutely nothing like the 3D Strip Brush System for its ability to strip uneven floors.

• Fits 15" trough 20" rotary machines


• Universal clutch plate for most rotary machine manufacturers


• 17-3/8" polypropylene pad and brush driver


• 2" polypropylene riser


• Mighty LOK pad holder and shower feed


• Naturally designed centering pad holder


• 4 reversible, replaceable, interchangeable brush inserts

There is absolutely nothing like the 3D Bonnit Brush System for its ability to clean large and small carpeted areas in just about any type of facility. This low-moisture, deep-cleaning system will astonish you with its capacity to dig out deeply embedded soils, fling them up to the carpets and be captured in the absorbent slotted pad.

This is a MUST SEE for every facility.

Need comfort, trusted performance and painless ease?

End your frustration with the Fluid Tool, the most ergonomic, user-friendly bucket-less microfiber mopping system in the world!

Mop heads are not included with this code. 

The 3D Brush & Mop Kit combines a thick, absorbent double-sided microfiber pad with a heavy-duty angled grout brush that can clean -

• Ceilings , Walls & Hard to Reach Areas


• Uneven Surfaces


• Grout Lines


• Edges, Corners & Stuck-On Messes!

 

The Bonnit Bug carpet spotting tool combines a pressurized carpet sprayer with a bonnit and brush combination. Simple,  easy and quick! It's the traditional cleaning tool-brush and a rag. Can be used on all carpet floor surfaces.

This is a MUST HAVE for every carpeted facility.

The Ultra-Mop 3D combines a thick, absorbent double-sided microfiber pad with a heavy-duty angled grout brush that can clean -

• Ceilings , Walls & Hard to Reach Areas


• Uneven Surfaces


• Grout Lines


• Edges, Corners & Stuck-On Messes!

n 

The Ultra-Mop is lightweight, ergonomic and environmentally responsible. It's superior cleaning efficiency with convenient thumb-control dispensing, uses 70% less chemical and water resources than conventional mops.

Reduce the risk of lower back strain and injury with the NEW SmartcanMax from Fas-Trak Industries. The innovative design allows for the removal of the can from the bag...not the bag from the can. Comes in 5 colors and Built to Last!

Reduce the risk of lower back strain and injury with the NEW SmartcanMax from Fas-Trak Industries. The innovative design allows for the removal of the can from the bag...not the bag from the can. Comes in 5 colors and Built to Last!

Reduce the risk of lower back strain and injury with the NEW SmartcanMax from Fas-Trak Industries. The innovative design allows for the removal of the can from the bag...not the bag from the can. Comes in 5 colors and Built to Last!

Reduce the risk of lower back strain and injury with the NEW SmartcanMax from Fas-Trak Industries. The innovative design allows for the removal of the can from the bag...not the bag from the can. Comes in 5 colors and Built to Last!

Reduce the risk of lower back strain and injury with the NEW SmartcanMax from Fas-Trak Industries. The innovative design allows for the removal of the can from the bag...not the bag from the can. Comes in 5 colors and Built to Last!

This product code refers to the 28" EZ Head Assembly only - so as to be bought separately for greater applicator versatility.

This product code refers to the 36" EZ Head Assembly only - so as to be bought separately for greater applicator versatility.

This product code refers to the 48" EZ Head Assembly only - so as to be bought separately for greater applicator versatility.

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak Plus, the 6-in-1 revolutionary application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

(This product code refers to the Ultra-Trak Plus Replacement Finish Pads only - 28", 6/pack).

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak Plus, the 6-in-1 revolutionary application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

(This product code refers to the Ultra-Trak Plus Replacement Finish Pads only - 36", 6/pack).

Pressured with the lack of productivity?

Overwhelmed with shrinking budgets?

Burdened with increasing work and decreasing time?

Fas-Trak Industries is proud to announce the Ultra-Trak Plus, the 6-in-1 revolutionary application system! The Ultra-Trak is the most productive, pressurized floor finishing/sealing applicator on the market today.

(This product code refers to the Ultra-Trak Plus Replacement Finish Pads only - 48", 6/pack).

Hard plastic tray to use for flushing and cleaning an Ultra-Trak unit.

36" Fas-Mop Cleaning Applicator Pads, 6per/ctn.

These high quality replacement microfiber mops provide for streak-free cleaning of all types of smooth, hard floor surfaces, when used with the Fluid Tool/Rocker Head mop. Comes 36 mops/case.

Replacement Pads for the Micro-Trak:

Unsure how to quickly apply finishes to edges and corners?

Unclear how to apply finishes to edges?

Fas-Trak Industries is proud to announce the new, improved Micro-Trak, our hi-speed detail finish system! The Micro-Trak is primarily designed for high efficiency finish detailing and for small sections that are inaccessible with the Ultra-Trak system.

This part number is just for the pads.

Bonnit Bug Pad, Sold in Case of 4

The 3D Brush & Mop Head holds a thick, absorbent double-sided microfiber pad with a heavy-duty angled grout brush that can clean -

• Ceilings , Walls & Hard to Reach Areas


• Uneven Surfaces


• Grout Lines


• Edges, Corners & Stuck-On Messes!

 

The 3D Scrub hard floor care is part of our full 3D Program of Labor-Saving, Cost-Reducing products. In this case, we have clearly seen how this one system - designed for removing floor finish, can cut that nasty job down by at least 65%!

UVC 253.7 NM Replacement Lamp for the Guardian X.

Do you feel defeated in removing scuff marks in a quick, professional manner?
Fas-Trak Industries is proud to introduce our Fas-Stik, another innovative tool to assist in your floor maintenance program. The Fas-Stik is revolutionary in that it is used to remove scuff marks and has a separate pad option to scrub or strip baseboards. The Fas-Stik saves time by reducing the buffing cycle. The Fas-Stik is lightweight but it has a weighted base design to allow for easy scuff removal.
It also works great as a touch-up tool!

Double Sided 13" Microfiber pads (4 per case)

Double Sided 16" Microfiber pads, with Colored Tabs (4 per case)
For use with

This code refers to the replacement pads only....

Description for full kit -

There is absolutely nothing like the 3D Bonnit Brush System for its ability to clean large and small carpeted areas in just about any type of facility. This low-moisture, deep-cleaning system will astonish you with its capacity to dig out deeply embedded soils, fling them up to the carpets and be captured in the absorbent slotted pad.

This is a MUST SEE for every facility.

Per case of 96 watches.

TAD™ will take the wearer's temperature every 15 minutes, showing the temperature for 10 seconds. Once the temperature light goes out, a Green, Amber, or Red indicator light stays illuminated as an indicator visible to those in your close proximity. Should the temperature be elevated to Amber or Red, the wearer will feel a vibration, which serves as an alert. In addition, the wearer's temperature can be taken manually with a simple push of a button!

SOLD IN CASES OF 96 WATCHES ONLY:

Per case of 24 watches.

TAD™ will take the wearer's temperature every 15 minutes, showing the temperature for 10 seconds. Once the temperature light goes out, a Green, Amber, or Red indicator light stays illuminated as an indicator visible to those in your close proximity. Should the temperature be elevated to Amber or Red, the wearer will feel a vibration, which serves as an alert. In addition, the wearer's temperature can be taken manually with a simple push of a button!

SOLD IN CASES OF 24 WATCHES ONLY:

The Stinger Tool is part of the complete Sting-Ray Direct Dispenser kit, but we offer it as a separate item for those who wish to have more than one spreader. These 16" Replacement Pads fit this tool, and come 5/pack.

Fas-Trak Industries is proud to introduce another patent pending breakthrough innovation performance solution in floor care.

The Stingray is designed specifically for applying floor finishes to small and medium size areas in facilities by the most efficient method available today! Fas-Trak Industries is the industry leader in application technology. (This part number refers a complete kit. Finish applicator and covers are also sold separately).

The Stinger Tool is part of the complete Sting-Ray Direct Dispenser kit, but we offer it as a separate item for those who wish to have more than one spreader.

Fas-Trak Industries is proud to introduce another patent pending breakthrough innovation performance solution in floor care.

The Stingray is designed specifically for applying floor finishes to small and medium size areas in facilities by the most efficient method available today! Fas-Trak Industries is the industry leader in application technology. (This part number refers a complete kit. Finish applicator and covers are also sold separately).